Check a follow-up text's full length, character type, and split-message limits, then preview it with real contact details before sending. You want a reply, not a wall of text. But short on your screen is not always short once it's sent. A draft that looks fine can split into several parts after it leaves your platform, and a personalization field can change the length from one prospect to the next, after you have already approved the draft.
Key takeaways
- Count the greeting, body, sign-off, and link together.
- Check character handling in your sending platform.
- Test personalization with long and short real names.
- Review the final preview before approving a draft.
This post covers three SMS length limits to check before a follow-up goes out, plus one preview check that teams often skip. It is written for revenue leaders at small firms who write their own follow-ups or review the ones their reps send. You don't need a technical background to use it.
Your texting tool may count or display length a little differently, so use the checklist at the end to confirm against your own platform.
Why length matters in a follow-up
SMS messages have a limit on how much text one message can carry. When a message is longer than that limit, the sending system breaks it into parts. Close's help center describes it this way: messages longer than 160 characters are automatically split into parts, called "segments," and then re-assembled when they are received.
Splitting matters for a sales team for three reasons. First, your prospect sees the re-assembled message, not the draft you read in your editor, so the wording you approved is the thing to check. Second, more parts means more to review, and a split can leave a sign-off or link stranded at the end of a message. Third, personalization can change the length each time the text goes out, so a single approved draft may not produce the same result for every contact.
What a well-built follow-up looks like
Length limits are easier to live with when the message itself is built well. A good follow-up at this length usually does three things. It states the reason for writing in the first line, so the prospect knows why they are hearing from you. It asks for one clear next step. And it leaves out anything the prospect can find elsewhere, such as a full pricing summary or a second link.
Start with the ask. A greeting can be short, such as a first name, but the sentence that matters most tells the prospect what you want. "Are you free Thursday to walk through the proposal?" does more work than a paragraph of background, because it gives the reader a simple answer to send back.
Keep to one link where you can. Each link adds length, and it gives the prospect one more thing to open on a phone. If the proposal, the calendar invite, and a case study all matter, choose the one that moves the deal forward and offer the others in a reply. For the task behind the text, use these sales follow-up checks.
Use plain words. Symbols, arrows, check marks, and decorative punctuation take up room and can add special characters without anyone noticing. Write the way you would speak to a busy buyer, and read the draft aloud once. If a sentence sounds like a form letter, it probably is one, and it is probably longer than it needs to be.
Limit 1: 160 characters for a single message
Most people have heard the number 160, and it is the figure to aim for with a standard follow-up. The number has history worth knowing. Twilio's glossary notes that the Global System for Mobile Communications (GSM) 03.38 recommendation limited a single SMS message to 140 bytes in length.
For your purposes, the practical point is simple. A standard message of up to 160 characters goes out as one part. Count the whole message, not only the sentence you wrote most carefully. That means the greeting, the body, the sign-off, the company name, and any link. A line like "Are you free Thursday to go over the proposal?" is short on its own, but a first name, a meeting link, and a signature can push the total past the line faster than most writers expect.
Paste the full text into a character counter or your platform's counter before you approve it. Do this for the version with real values filled in, not the one with brackets around field names, since brackets take up room too.
Limit 2: 70 characters when a message uses special characters
This is the limit that catches teams off guard. A message can look ordinary and still drop to a much shorter limit. Twilio explains that the single message character limit drops from 160 to 70 when a message uses these characters. The reason is in the encoding: the reduced limit comes from dividing 140 bytes by two bytes for each character.
Check how your platform handles the characters in your draft. Review punctuation after pasting from a document. If you write in a document and paste into your texting tool, check for these before you send. Replace curly quotes with straight ones, swap an emoji for a word, and retype any dash you did not mean to use. A short follow-up in plain text may fit in one part, but confirm the final count in your sending platform.
Limit 3: 153 characters in each part once a message splits
Once a message goes over its single-message limit, the room for each part gets smaller. Twilio notes that segmented SMS messages transmit 153 characters of data and seven characters for a User Data Header. For messages with special characters, Twilio's page says that a message longer than 70 characters splits into two or more messages with 67 characters each.
The two cases side by side look like this:
| Message type | Single message | Each part when split |
|---|---|---|
| Plain characters | 160 characters | 153 characters |
| Special characters | 70 characters | 67 characters |
The split is where estimates go wrong. If a teammate works out a follow-up's length from the single-message limit alone, they can be off by a full part. Count the actual message, not an estimate.
Check personalization fields before you send
Personalization fields hold details, such as a first name, a company name, or a deal owner, that your platform swaps for a real value when it sends. They are useful, and they make the final length of each message a little less predictable. HubSpot's knowledge base explains how its preview handles them: for personalization fields, the default preview uses the number of characters in the field's default value, or 15 characters if no default value is provided.
That 15-character figure is a stand-in, not a measurement of anyone's name. In practice, the preview is an estimate. If your default value is short, such as "there," the preview counts that short word. Two steps help. Set a default value that reads well when the field is empty. Then test the draft with the longest real name on your list and with a short one, and confirm that both versions still fit the limit you're aiming for.
Common mistakes that push a text over the limit
Most messages that run long or switch to the shorter limit come from a few habits. These are worth watching for in your own drafts and in the ones your team sends.
- Pasting from a document. Word processors often swap straight quotes for curly ones and two hyphens for an em dash. Paste as plain text, or retype the punctuation in the texting tool.
- Emoji added for warmth. Check the full draft in your platform before sending. If you want a friendly tone, a plain word can carry the warmth.
- Long signatures. A multi-line signature, a title, and a company tagline at the bottom of every message use room that the body needs. Keep the sign-off to a name and, if your firm requires it, the line your compliance contact approved.
- Long default values. A personalization default that is a full company name or a long phrase counts in full in the preview. Keep defaults short and natural.
- Links with tracking strings. A long link can take up much of a short message. Shorten links where your platform allows it, and test the message after you add one.
- Copied drafts. A text written for one deal gets reused with the name changed, and a line about a demo or a trial that no longer applies stays in. Re-read the whole message each time, not only the parts you changed.
- Required lines. If your firm adds a line for compliance, such as an opt-out or a disclosure, count it as part of the message. Ask your compliance contact which lines apply, rather than guessing from this post.
A checklist for reviewing a follow-up
Before a follow-up goes out, check each of these:
- Count the complete message, including the greeting, sign-off, and any link, using the values a real contact would see.
- Scan for special characters: emoji, curly quotes, and em dashes. Replace any you did not mean to use.
- Decide your target. Check whether the draft fits in one part using your platform's character handling.
- If a message will split, read it as the prospect will see it. Check that the opening line still makes sense alone and that a sign-off or link does not end up stranded in a short final part.
- Test personalization with the longest and shortest names on your list, and check the default value.
- Confirm the final version in your platform's own preview, not only in your document.
- Save the checked version as the approved draft, so reps copy a message that has already been counted.
Illustrative example: review a draft
Suppose a rep writes a follow-up to a prospect who asked for a call last week. The draft opens with a greeting that uses a name field, has two sentences of background, includes a proposal link, a sign-off with a long title, and a closing emoji.
The first problem is the total length. Check the message in the platform's preview before deciding whether it will split.
The rep replaces the emoji with a plain word, cuts the background to one short clause, and keeps the proposal link because the deal depends on it. The sign-off becomes a first name and a role. Then the rep fills the name field with the longest and shortest real names on the list, and checks the platform's preview for each.
Set one standard for the team
One writer's checklist works for one person. When several reps send follow-ups, you need a shared standard that everyone can apply the same way. Start with a small library of approved drafts. Each draft should be counted in the platform you use to send, with the result noted beside it, and with the default values for personalization fields filled in as they will appear.
Reps can then adapt a draft by swapping in the prospect's name and the deal details, and they should recount after any change beyond that. A new sentence, a new link, or a different sign-off changes the message, so it needs a new count. Recounting is easy to skip, and it is worth making a habit.
Assign a reviewer for each batch of follow-ups, and make that person's job specific. The reviewer checks the count, scans for special characters, and confirms that the field defaults read well. Give them the checklist from this post, so the review does not depend on who is on duty that week. Use the due date checks for sales follow-ups when reviewing the associated task.
Check what was sent, not only what was drafted. After a campaign, look at the messages as they appear in your platform's log or on a test phone. If one of them split when you expected it to fit, find the cause, whether it was a pasted character, a long default, or an added line, and add that case to your checklist. Revisit the standard when your platform, your drafts, or your compliance rules change.
When a longer message is worth it
Not every follow-up needs to fit in one part. A longer message can be the right choice when the moment calls for it, such as a reply to a question the prospect asked. The goal is to make length a decision rather than an accident. A split message you chose is easier to manage than one that happened because a link or a field pushed it over a limit that nobody noticed. If a draft runs long, cut the least useful sentence first, and ask whether the link can wait for a reply.
A reasonable test is to read the message aloud as the prospect would hear it. If the message still reads as complete and polite across two parts, a second part may be fine. If the second part contains only a sign-off or a stray link, trim the first part so the message ends on the ask.
Check your provider's guidance
Confirm how your carrier or phone displays a message, what your platform charges, and what rules apply to your industry. Treat the numbers here as the starting point for your own checks, and confirm details with your provider's documentation.
For anything beyond length, read Close's guidance and your provider's guidance directly.
Today, take one follow-up you plan to send, fill in real contact details, and run the checklist before saving the checked draft.
What to remember next time
Should every follow-up fit in one part?
No, a longer message can be appropriate when answering a prospect's question. Keep the purpose clear and review the whole message before sending.
Can I trust a personalization preview?
Treat the preview as an estimate until you test real contact values. Check both a long name and a short one before approving the draft.
What should I check after editing?
Check the full message again in your sending platform. Include the greeting, sign-off, links, and any required lines in that review.