Skip down to the research record

Recognized and deferred revenue: 3 invoice figures

Quota Forecast Editorial Team · Published · 10 min read

Recognized revenue counts toward a period; deferred revenue waits for a later period, illustrated by Stripe's example of a 36 USD invoice. By the end of January, the example says 22 USD (17 + 5) of revenue was recognized, and 14 USD of revenue remains deferred (to be recognized in February).

Key takeaways

  • Check each invoice line for its own period before you count it in a month.
  • Keep the 14 USD deferred to February separate from the 22 USD recognized by end of January.
  • Read the 31 USD line's period, January 15 to February 14, in Stripe's example before you split it.
  • Record payment status separately from recognized and deferred amounts.

So the answer is a split rather than one figure, and the month you count depends on the period attached to each line. Treat Stripe's example as one worked case, not as accounting advice or a rule that fits every revenue policy.

Why one invoice total hides two periods

A single invoice total can look like one month's money, but the Stripe example splits the same invoice across January and February. The example opens with a monthly subscription, and the invoice that follows carries line items with different timing. Someone who reads the total alone will miss that difference. Your first step is to open the invoice and read each line before you assign any amount to a month.

The example gives one figure for the whole bill, according to Stripe, and that figure is 36 USD. That figure is the starting point for this article, not the answer to the month question. Keep the total on your worksheet, but do not use it as the month's figure until each line has been read.

Revenue leaders are often asked a narrow question: how much of this invoice counts in the current month? The answer depends on the period attached to each line rather than on the amount printed at the bottom of the page. Keep that question in mind as you read, because each figure below answers one part of it. Your notes should record which part each figure supplies.

Use its numbers as a pattern to test against your own invoices, and keep your company's revenue policy as the reference. Write down which policy you applied so a second reader can follow the same split.

The example measures its first split at the end of January, so the boundary date is part of the figure. Put that date at the top of any worksheet you build, and write the invoice total beneath it. That order keeps the boundary visible when someone later asks why a number moved. Your worksheet should show the boundary date before any amounts appear.

Figure 1: the 36 USD invoice total

Invoice total: 36 USD

The first figure is the invoice total in Stripe's example. The source gives the whole-invoice figure at 36 USD, according to Stripe. That amount is the whole invoice, and it is not yet the month's figure. Label the 36 USD as the invoice total on your worksheet so the later splits have a fixed starting point. Writing the total down first also keeps the source of each part easy to trace when someone asks where a number came from.

The total is the input for everything that follows. Recognized and deferred are separate labels, so one column holding both amounts will blur them. Your worksheet should place the 36 USD on its own line, with space beneath it for the parts that come after. Keeping the total in its own row makes it harder to read as the month's amount by mistake.

The example gives the invoice total of 36 USD, and the line items carry the periods, so the total alone does not show when each part is recognized. Your reading order should run from the total to the lines, and then to the recognized and deferred amounts. Note the source of the total beside it, so a reviewer can find it again.

When you present this figure in a meeting, say the total first and then name the parts, so the listener hears the same order you used. This habit is a recommendation, not a rule from any source. Keep your sentences short, such as the invoice total followed by the recognized and deferred amounts.

Compare the parts with the total before you finish the worksheet. If the figures you record do not match the total, check the lines again before you present anything. Keep each figure's date beside it, so the total stays easy to place in time.

Figure 2: the 22 USD recognized by end of January

Recognized by end of January: 22 USD

The second figure is the amount recognized by the end of January. The example says that if you inspected the account balances at the end of January, you would see 22 USD (17 + 5) of revenue recognized, according to Stripe. The source shows the figure as 17 plus 5, which points to parts with separate timing.

Read the 22 USD as a balance at a date rather than as a payment. The example frames it as an account balance, so the figure describes what has been recognized by a point in time. Do not treat it as a booked deal or a payment received. Note the date on every copy of this figure.

The 22 USD includes the 5 USD line, which is recognized immediately on January 15, according to Stripe. It also includes the January part of the 31 USD line, which is recognized over 17 days in January.

The customer in the example starts a monthly subscription for 31 USD on January 15. The source says, according to Stripe, that the customer received 17 days of service but didn't pay.

Use the January figure for January alone. Keep payment status in its own column, separate from the recognition split, so an unpaid amount is not mixed up with the recognition split. Your worksheet will be easier to check when the two columns stay apart.

Figure 3: the 14 USD deferred to February

Deferred to February: 14 USD

The third figure is the amount that waits. The source says that 14 USD of revenue remains deferred (to be recognized in February), according to Stripe.

The number 14 appears twice in the example, and the two uses carry different units. One 14 is the deferred amount in USD. The source, according to Stripe, puts 14 days in February with the 31 USD line.

The 31 USD line has a period from January 15 to February 14. That period lets the source split the line across January and February, according to Stripe. Track the February amount on its own row, so the next month's worksheet starts from a clear figure.

Do not carry the 14 USD into the current month as recognized revenue. Write the February date beside it, so the amount is easy to find when February arrives. Keep the two 14 figures apart in your notes and in any table you share.

Label one as USD and the other as days, so no reader mistakes one for the other. That label takes a moment to write and saves a question later in the meeting.

How the 31 USD and 5 USD lines differ

The source, according to Stripe, describes a line item for 31 USD with a period from January 15 to February 14. That is the dated line in the example, and it has a start and an end.

The 5 USD line is the other one. The source, according to Stripe, describes a line item for 5 USD with no period set. That description is what separates it from the dated line.

The source states, according to Stripe, that the 31 USD is recognized over 17 days in January and 14 days in February, but the 5 USD is immediately recognized on January 15. Read the two parts as separate timing questions, not as one bundle.

Record for each line whether a period is present and, if it is, its start and end dates. Mark the no-period line on its own row so the immediate recognition stays visible. Your worksheet should keep those rows apart from the total row.

Illustrative example: split a 30 USD invoice

This example is invented for illustration and is not taken from any source. Assume a 30 USD invoice with a single line covering 30 days. For illustration, spread the amount equally across those days. If 10 days fall in the first month, recognize 10 USD in that month and defer the remaining amount. Your own split follows your own dates and revenue policy.

Comparing your own invoice to the example

Compare your own invoice with the example by listing its lines first. For each line, write whether it has a period and, if it does, the start and end dates. Use the example's pair of lines, a dated 31 USD line and an undated 5 USD line, as the pattern to match. Your invoice may differ, so match each line before you apply the split.

If your invoice began as a quote, record that origin before you split any lines, using the quote acceptance checklist. Keep the quote's date and the invoice's date on the same row so the two can be compared.

These tables bring the amounts and timing in Stripe's example together for comparison.

Invoice figureAmount
Invoice total36 USD
Recognized by end of January22 USD (17 + 5)
Deferred to February14 USD
Line amountPeriodRecognition timing
31 USDJanuary 15 to February 1417 days in January and 14 days in February
5 USDNo period setImmediately on January 15

Next step

Your next step is to pick one open invoice with a period and a no-period line, and split it into recognized and deferred amounts for the current month. Write the total on the first row, the recognized amount on the second row, and the deferred amount on the last row. Note which line carried a period and which did not. Bring the finished split to your next forecast review so the current month is discussed with the same figures.

Questions and answers

How much of the 36 USD invoice is recognized in January?

By the end of January, 22 USD (17 + 5) was recognized in Stripe's example. That figure is a balance at a date, so read it as the amount recognized by the end of January. Check whether your invoice follows the same pattern before you use the figure.

When is the 5 USD recognized?

The 5 USD is immediately recognized on January 15 in Stripe's example. The line has no period set. Check the no-period line on your own invoice first before you count its amount this month.

How is the 31 USD line split?

The 31 USD is recognized over 17 days in January and 14 days in February in Stripe's example. That line has a period from January 15 to February 14. Use your own line's start and end dates to find the split before you assign any amount to a month.

Does a negative invoice item count as a proration?

A manually created negative invoice item is not automatically classified as a proration, according to Stripe. Read that rule as Stripe's wording rather than as a rule for every billing setup. Record how you classified any negative item, since that classification is not automatic.

Does the 14 USD deferred amount move into February?

The 14 USD remains deferred for recognition in February in Stripe's example. That wording points the amount to February rather than January. Keep the 14 USD separate from the 14 days in February when you write your forecast note.

Can I apply the 17-day split to other months?

No; the 17-day split describes January in Stripe's example. Build the split for each month from that month's own period dates.

Sources