Skip down to the research record

Quote expiry checks: 5 steps before you move a close date

Quota Forecast Editorial Team · Published · 12 min read

Before you move a close date, check what the quote is for, when it expires, and whether it can be extended. Those three checks tell you whether an open quote still supports the date on your forecast. They also give you something concrete to say when the forecast call asks why the date changed.

Key takeaways

  • read the quote's purpose before you change any close date on the deal.
  • write the expiration date beside the close date once your quoting tool shows it.
  • extend a quote only when the deal is still live.
  • check billing cycle and quick charge limits in the tool your quote is built in.
  • follow up promptly and confirm who is on the thread before the forecast call.

Why quote expiry matters to a close date

A quote is useful in enabling you to implement internal purchase approval processes at your end, according to Chargebee. Approval is a step your team controls, and it can run on a timeline different from the close date in your pipeline. When you review open quotes, check whether the approval status and the close date still agree. For a closer look at approval checks, see Quote approval checklist: 4 checks on quoted amounts.

A quote in Chargebee is a document used to inform a potential buyer of the cost of goods or services before they commit to the purchase, according to Chargebee. Treat the total on the quote as the reference point for the amount your forecast carries. Before the call, compare the two figures and write down any difference.

A close date tells your forecast when a deal should land, so a quote past its expiration date is a reason to check the date before you leave it unchanged. An expired quote is not, by itself, a verdict on the deal. You can ask the account owner what has changed since the quote was sent, and record the answer beside the date.

Check 1: what the quote is for

The purpose of the quote

You can start by reading the quote and writing its purpose in one plain sentence. If the document is mainly about price, the total on the page is the figure your forecast should match. If it is mainly there to move an internal approval, the approval status matters more than the amount. Write that choice down before you touch the close date.

You can note the quote's version, its document number, and the name of the person who sent it. Those details let you find the right document when the forecast call asks about it. Keep the quote separate from later paperwork in your notes, because mixing the two makes the expiration question harder to answer.

You can check the buyer named on the quote against the buyer named on the deal record. If the names differ, ask your rep which company the quote was written for, and write the answer beside the deal. A mismatch found now is easier to resolve than one found during the call.

You can look at whether the quote is still the current version. If a newer quote replaced it, the open record may show the old terms, so compare dates and version numbers. Mark the older quote as superseded once you confirm the newer one. If you cannot confirm which version is current, leave the close date alone until you can.

You can finish by writing the purpose on one line in your forecast notes. That line gives the next reviewer the same starting point you had. It also shows which of the checks below matters most for this deal.

Check 2: where the expiration date sits

Finding the expiration date variable

PandaDoc's article says to open the variables section, reached through View > All Variables, and scroll down to find the Document.ExpirationDate, according to PandaDoc. You can do this before the forecast call so the date is ready when the call starts. Keep the variable name in your notes so the next person can repeat the check. If the variable is blank, record that fact rather than guessing a date.

The variable will be automatically populated with the expiration date after you send the document, according to PandaDoc. Until the document is sent, treat a blank field as unconfirmed rather than as a date. You can copy the date into the forecast record and name the source beside it.

PandaDoc notes that you "can enable the ability to change document auto-expiration period" in the "Workflow" section in the Extensions, according to PandaDoc. If your team uses this setting, ask an admin where it is enabled before you assume the period matches your other quotes. Write the expiration period beside the date in your notes.

You can compare the expiration date with the date your forecast shows for the deal. If the forecast date falls after the expiration date, pause before you move anything. Flag the deal for a short conversation with the rep, and use the same wording for each flag so the list is easy to filter.

Expiration settings belong to each tool, so you should not assume one tool's rule applies everywhere. The PandaDoc page describes PandaDoc's own settings, and your system may use different ones. You can ask your admin to confirm the setting, and keep that confirmation in the same note as the date.

Check 3: how to extend an expired quote

Extending while the deal is live

PandaDoc's help article describes the steps: hover over a document on the far right, click three vertical ellipses, and select Extend expiration from the dropdown, according to PandaDoc. Before you do this, confirm the deal is still live, meaning the buyer has not told you the project is off. You can check the deal record for the latest update from the rep, and note its date.

You can write down who approved the new expiration date, the reason you extended it, and the date you plan to revisit the record. If the buyer has gone quiet, note that in the record rather than extending by default. Extending by default can hide the risk in the forecast.

An extended date is a record decision in your own process, not proof that the buyer has agreed to the terms. You can ask the rep for a short update from the buyer before the forecast call, and note the date of that update. If the buyer does not respond, let the close date stay where the evidence puts it.

When the deal is no longer live, do not extend the quote just to keep the forecast tidy. Mark the deal for review, and move the close date only after you agree the new timing with the rep. You can document that timing in the same place as the quote details, so the next reviewer has one place to look.

You can plan the extension and the close date review together, so one does not move without the other. If the two dates disagree in your notes, resolve that before the call. Mark each resolved line with the date you resolved it.

Illustrative example: a quote past its date

Suppose a deal shows a close date 25 days from now, and its quote expired 10 days ago. Start by asking the rep whether the buyer still wants the project. If the buyer is still evaluating, extend the quote, write down who approved the new date and the reason, and review the record again in 30 days. If the project is off, do not extend the quote. Re-date the close date only after you agree the new timing with the rep. Either way, write one line in your forecast notes with the expiration date, the decision and the rep's name.

Check 4: billing cycle and quick charge limits

Reading the limits in your own tool

On the Chargebee quotes page, you can only specify up to 24 billing cycles in the No. of billing cycles field, according to Chargebee. That is a limit on that entry field, not a statement about every quoting tool. Check the same field in your own tool, and write the limit beside the quote. If your billing schedule needs more cycles, flag the quote for a second look.

The Chargebee quotes page includes the line "Quick Charge limit of 10 while adding it to a quote?", according to Chargebee. You can look for that limit when you add items to the quote, and note it beside the billing cycle figure. A reviewer can then see both limits without opening the quote again.

A limit is a fact about the tool, so it does not tell you whether the buyer will accept the schedule. Treat the limit as a boundary for the quote, and ask the rep whether the schedule in the deal matches it. If it does not match, correct the quote before you change the close date, and write the mismatch in the notes.

You should not round a schedule to fit a limit without the rep's agreement. A changed schedule is a change to the deal, so record the date and the rep who agreed to it. The record then shows why the forecast moved. For a worked record of moved dates, see Close date change log: why the date moved.

You should confirm which limit applies to the quote you are reviewing, because the Chargebee figures describe Chargebee's quoting feature. If your rep uses a different tool, ask the rep to show the field on screen during the call. If the rep cannot show it, hold the close date until the quote is checked.

Check 5: follow-up timing and who is on the thread

Following up within 24 hours

Seismic's meetings page says those that follow up within 24 hours can increase their likeliness to close by 3-7 times, according to Seismic. That is a vendor's claim, not a rule for your team, so use it to set priority rather than to promise a result. You can set a reminder for each open quote to check its follow-up date.

HubSpot's article on associated records says that, when making a sale, you communicate by email with three individuals at the same company, according to HubSpot. You can use that as a prompt to list everyone on the thread for each open quote, including people who did not sign the quote. Name each person and their role in the deal, so you know who should reply.

Salesforce's cold outreach article cites a Small and Medium Business Trends Report that found 76% of SMB customers say their teams operate off the same CRM view, according to Salesforce. You can check that each person on the thread sees the same expiration date and close date in the shared record.

When a buyer replies to one person on the thread, you can update the others in the record the same day. If the reply changes the expiration, the close date, or the billing cycle, note the change beside the quote with the sender and the date. That keeps the thread readable for the next forecast review.

You can read the whole thread before you move any date. A reply the record does not yet reflect is a reason to hold the close date until the record is updated.

The table below gathers the main quoted sources used in this article.

PublisherSourceQuoted wording
ChargebeeQuotes documentation"You can only specify up to 24 billing cycles in the No. of billing cycles field."
PandaDocAuto expirations article"The variable will be automatically populated with the expiration date after you send the document."
SeismicMeetings page"those that follow up within 24 hours can increase their likeliness to close by 3-7 times."
HubSpotAssociate records articleParaphrased: when making a sale, you communicate by email with three individuals at the same company.
SalesforceCold outreach tips article"the latest Small and Medium Business Trends Report found that 76% of SMB customers say their teams operate off the same CRM view"

Next step before the forecast call

Open your three oldest open quotes, note each expiration date, and extend the quote, or re-date the close date after agreeing the new timing with the rep, for any quote that has expired. You can extend a quote only where the deal is still live, and re-date the close date where it is not. Write the result for each quote on one line, with the expiration date, the decision, and the name of the rep.

FAQ

Where do I find a PandaDoc document's expiration date?

You can find it in the variables section, reached through View > All Variables, where you scroll down to the Document.ExpirationDate, according to PandaDoc. Until the document is sent, record the date as unconfirmed. Copy the date into your forecast record with its source named.

How do I extend a PandaDoc document's expiration?

The steps are to hover over a document on the far right, click three vertical ellipses, and select Extend expiration from the dropdown, according to PandaDoc. Use that step only after you have confirmed the deal is still live. Note who approved the new date and the reason for it. Once the change is made, write the new expiration date in your forecast record.

What is the billing cycle limit in Chargebee quotes?

You can only specify up to 24 billing cycles in the No. of billing cycles field, according to Chargebee. That limit comes from Chargebee's quotes page, so check your own tool before you assume the same figure. If your schedule needs more cycles than 24 billing cycles, flag the quote for review before you change the close date.

Does a follow-up within 24 hours change the odds of closing?

Seismic's meetings page says a follow-up within 24 hours can increase the likeliness to close, though that is the vendor's own claim and not a guarantee for your team, according to Seismic. Treat it as context for setting follow-up priority, not as a forecast for this deal. Keep the follow-up date on each open quote where the team can see it.

Should I move a close date when a quote has expired?

Check the expiration date, whether the quote can be extended, and whether the deal is still live before you change the date. An expired quote is a prompt to review the deal, not a finding that the deal is lost. If the deal is still live, extend the quote and record the reason in your notes. If it is not live, re-date the close date only after you agree the new timing with the rep.

What should I do first with my open quotes?

Start with the three oldest open quotes, and note each expiration date beside its deal. Where a deal is no longer live, re-date the close date instead of extending the quote. Write the result for each quote on one line in your forecast notes. Bring those lines to the forecast call so the review starts from one record.

Sources