Before moving deal emails and shared files into a quarter-end record, check five mailbox and file limits and confirm the deal set.
For many small B2B teams, those items are spread across several places. Deal emails sit in mailboxes. Proposals, signed contracts, and call notes sit in shared folders. The quarter-end record is the set of those items you pull together and keep as the reference when someone asks later what was agreed and when.
Those places have limits. A mailbox can reach a storage ceiling, a folder can hold only so many child folders, and a file can be too large to send the ordinary way. Left unchecked, these limits can leave gaps: a message is skipped, a folder refuses new items, or a link points to a file that was changed after you reviewed it. Nobody gets an error that says the record is incomplete. You find out when a customer dispute or an auditor asks for a thread that is not there.
The six checks below, five for limits and one for the deal set, are meant to be done before you move anything. Each one takes a few minutes to look up. Where a limit has a published number, the section links the official page so you can confirm the current figure. Limits change, and your plan or contract may differ from the examples here, so treat each number as a starting point for your own check rather than a promise about your account.
1. Confirm which archive quota applies to your mailboxes
Many teams keep older deal emails in an archive mailbox, separate from the one people use day to day. If that is your setup, the size ceiling depends on the licenses your users hold. Microsoft's Exchange Online limits page gives the archive storage quota as 1.5 TB for users with an Exchange Online Plan 2 license, or for users who have both an Exchange Online Plan 1 and an Exchange Online Archiving license.
Those are two routes to the same figure, and that matters for a small team. If some reps have one license combination and others have another, a single quota number in a planning spreadsheet may be wrong for part of the group. Pull a list of which accounts hold which licenses, then note the quota that applies to each person. Ten minutes of work here prevents a surprise later.
Do not rely on memory for the current size, either. Check the actual size of each archive as it stands this month and compare it with the quota that applies. A mailbox that looked comfortable last year can grow quickly if a team has been sending long threads with large attachments, especially during a busy quarter with many active deals.
If you find an archive that is close to its ceiling, decide before quarter end where the overflow will go. Moving deal emails into a nearly full archive only shifts the problem to the next step, which is the point where you need room for the record itself. Write down the decision, who made it, and the date, so the record shows how the storage was handled.
It also helps to ask a simple question for each mailbox: if the record had to be copied out tomorrow, would there be room for it? If the honest answer is "I'm not sure," that is your signal to check the numbers before anything else on this list. Treat an unclear answer as a blocked item, not a detail to revisit later.
2. Keep the Recoverable Items quota separate from the archive quota
Exchange also tracks a Recoverable Items folder, and the same Microsoft page gives its own quota figure for archive mailboxes. The page says the initial storage quota for the Recoverable Items folder in an archive mailbox is 100 GB. The page is also explicit that this is the storage quota for that folder, not the quota for the entire archive mailbox.
The practical mistake is mixing the two numbers up. Someone sees 100 GB and assumes the whole archive is capped there. Someone else sees 1.5 TB and assumes the Recoverable Items folder has the same headroom. Treat them as two separate figures. When you estimate how much room a quarter's worth of records will need, check the whole-archive figure and the Recoverable Items figure on their own, and write down which one your estimate is based on.
The word "initial" in the page matters as well. The number you see is a starting point for that folder, not a fixed promise for the life of the account. Confirm the current value on the page before you plan around it, and do not treat last quarter's note as current.
Be careful with cleanup, too. When a folder is getting full, the quickest fix is to delete things, and deleting is the step most likely to remove deal history you need. Before anyone clears items to make room, agree with whoever owns your retention rules about what may be removed and what must stay. A cleanup done in a hurry is hard to undo, and it can leave the record with holes nobody noticed until the review.
3. Count direct child folders under each parent
Folder structure is where small teams often get clever. One folder for each account, filed under a single parent called "Accounts," feels tidy at the start. It stays tidy until the list grows past what anyone wants to scroll through. Microsoft's Exchange Online limits page states that there can be only 10,000 direct child folders for any given parent. The limit applies to each parent separately, so a structure can hit it at one level even when the total number of folders across the mailbox looks modest.
Start by finding the parent folders with the most children. Count the direct children under each one, not the total number of folders underneath it, because the limit counts only the direct children. If a parent is approaching the figure, begin splitting it before you are forced to. Splitting by year or by quarter is a common approach, so the account folders under any one period stay easy to manage and the parent count stays low.
Think about the people who will use the structure next. A folder path that makes sense to the person who built it may confuse a new hire or a finance colleague who needs to find a contract. Keep names consistent, such as using the same account name format each time, and avoid renaming folders in the middle of a quarter. A renamed folder can break a saved search or a link someone has been using for months.
Record your structure in one short document. Note the parent folders, what each one holds, and the date you last counted the children. The next person who inherits this work will then know where the limit is likely to be hit first, without having to rediscover it.
One more point: the folder structure you use for the quarter-end record does not have to match the structure your team uses day to day. Many teams keep a working layout for active deals and a separate, simpler layout for closed quarters. The record layout can be flatter, with fewer parents and more clearly named periods, because its job is to be stable and easy to review, not to be convenient while a deal is still moving.
4. Check message counts in each folder
Microsoft's Exchange Online limits page also gives a guideline for how many messages a single folder should hold. The page says that Microsoft recommends no more than 1,000,000 messages in a single mailbox folder. Read the wording closely. The page frames this as a recommendation, not a hard limit, so it is a planning figure rather than an error waiting to happen. Treat it as the point where you should start asking whether a folder still makes sense as one container.
A folder that holds every deal email from several years is hard to scan and easy to mis-copy when you move it, because a large batch is harder to check by eye. Splitting a crowded folder into smaller folders by quarter or by team makes each move easier to verify, and it makes it easier to show a reviewer exactly what is included.
Count the messages in any folder that holds deal email. Your mail client or admin tools will usually show item counts, and the figure you need is the count for the folder itself, not the whole mailbox. Note any folder above the guideline. Then decide whether to split it before the record move, while there is time to check each batch. Do not plan to split it during the move itself, because a split under deadline pressure is where threads go missing.
When you split, keep a simple log: the old folder, the new folders, the date range each one covers, and the message count before and after. If the counts do not add up, you know to look before the record is finalized. The log also gives you proof that nothing was lost, which is valuable if a deal is questioned later.
If a folder is split by team rather than by period, add a column for the team that owns the deals in each batch. That makes it easy for a sales lead or a finance reviewer to check their own deals without reading the whole export. Keep the log in the same place as the record notes, so the two never drift apart.
5. Check file sizes against transfer limits before you link
Shared deal files create a second problem. A proposal deck, a signed PDF with a large scan, or a recorded product demo may not travel through ordinary email. So people send a link instead, and the file lives somewhere else. If your team uses Dropbox, its large file transfer page says that with Dropbox Transfer, you can send large files up to 100 GB without taking up space in your Dropbox account. For bigger files, the same page says that if you need more juice, get our Replay Add-On to transfer files up to 250 GB.
Those figures describe different options. The 100 GB limit is for Dropbox Transfer, and the 250 GB limit comes with the Replay Add-On. Do not assume a file that fits one option fits the other, and do not assume a file over 100 GB will move at all without checking which option your team has. Make a list of the large files tied to each deal, including contracts, scanned signatures, and recordings. Check each file's size against the limit for the method your team actually uses. For a related gate on evidence uploads, see file size limits before evidence uploads.
A file over the limit may fail to transfer, and the problem may not be obvious. A transfer that did not finish can look like a normal message until someone tries to open the attachment or the link. Use the size check as a gate. Any file that fails it gets a different route before the record is assembled, whether that is a different method or a split into smaller parts with a note explaining the split.
Shared links are the other half of this check. The same page explains that to send large files from your Dropbox account, simply create a shared link that you can send over email or text. A link is convenient for a record because it keeps the email short. But a link is only a pointer. If the file is replaced or edited after you link it, the link may show a different version from the one you reviewed, and the record will look fine while being wrong.
Before the quarter closes, copy the final version of each signed or approved document into the record location, then paste the link to that copy into the deal record. Note the date you copied it. If someone later asks what was signed, you can open the exact file that went into the record and compare it with the one in the deal.
File names matter here too. A name such as "contract final v3" tells a reviewer far less than the account name, the signing date, and a short description of the document. Use the same pattern for every deal so anyone can sort the folder by name and find what they need. Then do one last pass over the files attached to the deals in your filtered set, looking for anything that is still a draft, marked as a duplicate, or saved in a personal folder rather than the shared one.
6. Use a saved filter so the record covers the same deals
The last check is about the set of deals itself. Before you move any emails or files, make sure the list of deals you are closing out is exactly the list you intended. A deal missing from the set means its emails and files will be missing from the record too. A deal included by mistake adds noise that a reviewer must sort out.
If your CRM is HubSpot, its help page on viewing and filtering records states that filters allow you to view only certain records or create reusable displays. Other CRMs have similar saved views, though the steps differ. Whatever tool you use, the approach is the same. Build a filter that selects the deals closed in the quarter, check how many results it returns, and save it as a reusable view so you can return to the same set next quarter.
Once the filter is saved, compare its count with the number of deals your finance or booking report shows for the same period. For a fuller reconciliation, see bookings reconciliation checks for quarter close. If the two numbers differ, find out why before you move a single email. The difference is often a deal with a close date set to the wrong day (see Close date change log: why the date moved), or a deal owned by someone outside the team who did not get included in the view. Fixing these before the move is far easier than hunting for missing threads afterward.
Keep the filter's conditions in your record notes too. Write down the close-date range, the stage or status, and any owner or team conditions you used. A reviewer can then see exactly how the set was chosen, and the next person can rebuild it if the saved view is ever deleted or edited.
Watch for deals that sit between quarters. A deal that closed on the last day of the quarter, or one reopened after it was marked closed, can fall in or out of the set depending on how the date is stored and which time zone the report uses. Check the edge cases by hand. Look at the deals closest to each boundary, confirm their dates, and add a note for any you decided to include or exclude and why. Those few notes will save a long conversation when a number is questioned.
Run the checks early
These six checks have one thing in common: they are easiest to fix when you find them early. Run them two or three weeks before the quarter ends. Write down what you find, mark each item as clear, at risk, or blocked, and fix the blocked items first. A blocked item might be an archive near its quota, a folder above the guideline, or a file too large for the method your team uses. Each of these needs a decision, and decisions made in a rush tend to create the gaps you were trying to prevent.
Once the checks are clean, do the move in a defined order. Start with the deal set from your saved filter, then the emails for those deals, then the shared files and their final copies. Check each step against your notes before you move on to the next. When you finish, keep the notes with the record. They show how the quarter-end record was built, which limits applied, and what you did about each one. That history is often as useful as the record itself.
Related guides: AVERAGEIFS errors that skew average deal size: 4 checks · Check the buying company on a deal: 5 record limits.