Why these three figures
Check three payroll tax figures on a rep's pay: the 6.2% Social Security rate, the $184,500 wage base limit, and the 1.45% Medicare rate. Before a commission or bonus payment goes out, most revenue leaders look at the gross amount and the total. Far fewer look at the tax lines underneath it. Those lines are where a small error turns into a rep's question, a correction, or an adjustment in the next run. You do not need to be a payroll specialist to catch the most common problems. You need three reference figures and a habit of comparing the pay record against them.
The figures below come from the Internal Revenue Service's Publication 15 (2026), Circular E, Employer's Tax Guide. That guide is the federal reference many employers use for withholding and employer payroll taxes. This post covers the three figures that matter most in a rep's pay review: the Social Security rate, the Social Security wage base, and the Medicare rate.
This post is general information, not tax advice. Your payroll team and your tax advisor own the final calculation, and this review does not replace them.
Revenue leaders also have a reason to care beyond the rep's pay record. The employer's share of payroll tax is a real cost on top of taxable payments, so a plan model that stops at gross payout will understate what a payment costs. Checking the tax lines keeps the forecast and the paycheck tied together.
Figure 1: the 6.2% Social Security rate
The guide states that the rate of social security tax on taxable wages is 6.2% each for the employer and employee (Publication 15 (2026)). Two things follow for a pay review.
First, the employee Social Security line should equal 6.2% of the taxable wages on that check, until the year reaches the limit covered below. It should not be a rounded figure or a number someone estimated.
Second, the employer side is also 6.2%. The employer's matching share is paid on top of the rep's wages and does not come out of the rep's check. Each side pays its own share, so the employer's cost for the payment is higher than the gross amount alone.
A quick check is to take the taxable wages for the run, multiply them by 6.2%, and compare the result with the employee line. If they differ, ask payroll which pay types went into the taxable base for this run. Confirm that any expense reimbursements were handled the way your company's policy says, since a reimbursement that lands in the wrong base can throw the line off.
Next comes the cap, which is where most surprises happen.
Figure 2: the $184,500 wage base limit
The guide gives the social security wage base limit as $184,500 (Publication 15 (2026)). The wage base limit is a cap. It sets how much of a worker's wages in a year can be subject to the Social Security tax. Once a rep's year-to-date wages reach the limit, the Social Security line should stop growing.
This matters most for reps with large year-end payments. A rep may be well under the limit for most of the year and then cross it during one run. If that happens, only the part of the payment that falls under the limit should carry the Social Security line. A system that keeps charging 6.2% on the full payment after the cap has an error.
To check it, work through three steps:
- Find the year-to-date Social Security wages on the rep's most recent pay record.
- Add the taxable wages for the run you are reviewing.
- Compare the total with $184,500. If the total stays under the limit, the full run should carry the 6.2% line. If it crosses the limit, only the portion of the run that brings year-to-date Social Security wages up to $184,500 (the room left under the limit) should carry the 6.2% line.
One caution applies here. Your payroll system only sees the wages it paid. If the rep worked for another employer earlier in the same year, your year-to-date figure may be too low. Ask the rep or HR whether that applies before you call the line an error. The fix belongs to payroll, but the question belongs to you.
Figure 3: the 1.45% Medicare rate
The guide states that the Medicare tax rate is 1.45% each for the employee and employer, unchanged from 2025 (Publication 15 (2026)). That detail is useful in a review. Because the rate did not change from last year, a Medicare line that is off from 1.45% is not explained by a new rate. It is a mismatch to investigate.
The check mirrors the Social Security check. Take the taxable wages for the run, multiply them by 1.45%, and compare the result with the employee Medicare line. Then look at the employer line, which should show the same rate. If one side shows a different percentage than the other, flag it.
Ask payroll which wage figure the system used for each line. If the Social Security and Medicare lines are built from different bases, your comparison will look wrong even when the system is right. Confirm the base before you call a line an error.
Reading a capped line
The clearest sign of a problem is a Social Security line that keeps growing after the rep has passed the limit. A line that stays at 6.2% of the full run when the year-to-date total has already crossed $184,500 looks reasonable at a glance, because the rate is correct.
When you review a run that crosses the limit, ask payroll to show two things: the room left under the limit at the start of the run, and the portion of the run that carried Social Security tax. The taxed portion should match the room left. Anything above that portion should not carry the Social Security line.
The fix is to compare the base, not the rate.
Common mistakes
Many problems in a rep's tax lines come from a short list of causes. Knowing them makes the review faster.
- The rate was applied to the wrong base, such as a payment that included items the company does not treat as taxable wages.
- The Social Security cap was ignored for a rep who crossed the limit mid-run.
- Year-to-date totals were carried over wrong, for example, because the rep had earlier wages from another employer that the system never saw.
- A rate table was not updated for the year, so the system used an old figure.
- The employee line matched the rate, but the employer line was never created or was built on a different base.
Each of these shows up as a line that looks almost right. That is why a quick comparison against three figures catches more than a quick glance at the total.
Putting the review together
Use the same order every time, so a missed line is easy to spot.
- Get the gross pay and the taxable wage figure for the run from payroll.
- Check the employee Social Security line against 6.2% of the taxable wages, capped at the $184,500 limit.
- Check the employee Medicare line against 1.45% of the taxable wages.
- Confirm the employer lines use the same rates, 6.2% and 1.45%.
- Compare year-to-date Social Security wages with the limit.
- Flag any mismatch to payroll before the run is released, not after the money has moved.
Keep the list to these six steps. Revenue leaders usually do not fix the calculation themselves. The goal is to catch the question early and send it to the person who owns the answer.
Where the review fits in the pay run
The best time for this review is after payroll has calculated the run and before anything is released. At that point, the lines exist and can still be changed without a reversal.
Some teams also review a sample after release. That is useful for finding patterns, but it is slower and it is harder to fix a single rep's pay quickly. Use the sample to tune the pre-release check, not to replace it.
Put the review on the calendar with a fixed owner and a fixed time before each run. A review that depends on someone remembering it tends to be skipped on the busiest run of the quarter. For more on payout timing, see commission payout time checks.
Who owns which line
Revenue leaders and payroll teams see different parts of the same pay. Revenue operations usually knows the plan, the quota attainment, and the payment schedule. Payroll knows the tax tables, the year-to-date totals, and the system settings. A good review uses both views without asking either side to do the other's job.
In practice, the revenue side checks the amounts against the plan and the payroll side checks the tax lines against the rate and the cap. Each side should be able to say what it checked and what it did not.
The three figures in this post belong to the payroll side, but revenue leaders are the ones who see the plan's effect on them. A bonus that pushes a rep past the wage base changes the employer's cost in a way a plan model may not show. That is a question to raise in planning, not only during the review.
Questions to ask payroll
When a line looks off, these questions usually narrow the problem faster than a general request to check the taxes:
- Which pay types went into the taxable wages for this run?
- What year-to-date Social Security wages did the system use, and did the rep have wages from an earlier employer this year?
- Which wage figure was used for the Medicare line, and is it the same one used for Social Security?
- Is the system's tax table updated for the current year?
- Can you send the calculation so I can compare it with mine?
When a line does not match
Do not change the pay yourself. Send payroll three things: the rep's pay record, the figure you expected and how you got it, and the question you want answered.
A short, specific note gets a faster answer than a general request to "look at the taxes." If the mismatch is about the wage base, include the year-to-date Social Security total you used so payroll can reproduce your number.
Keep the tone factual. A reviewer who asks a clear question about a line is doing the job. A reviewer who sends a vague alarm slows the run down for everyone.
Also, if the mismatch is small and you cannot tell why, do not treat it as proof of a problem. Ask first.
Explaining the lines to a rep
A rep who asks about a tax line usually wants to know one thing: why the check differs from the number they expected. Start there.
Tell them what the three lines are. Social Security is withheld from the employee at 6.2% of taxable wages, up to the $184,500 limit in Publication 15 (2026). Medicare is withheld at 1.45%. Both rates have the same employer match.
Avoid jargon when you explain. "Wage base" is a payroll term, so say "the yearly limit on wages that carry Social Security tax."
If the rep asks why the Social Security line stopped, the answer may be the cap. If the line looks wrong after you check it, say you are asking payroll and give a date for an answer. Don't promise a correction before payroll confirms it.
Planning for the year-end cap
The wage base changes the economics of late-year pay. A payment that lands after a rep has passed the limit carries less Social Security tax than the same payment made early in the year, because the Social Security line stops at the cap.
For revenue leaders, that means a late-year bonus may cost less in employer Social Security tax than the same bonus paid early in the year, but the difference depends on the rep's year-to-date wages. Do not assume a flat tax load on every payment.
A simple planning habit helps. For each high-earning rep, model the year-to-date Social Security wages and find the point where the cap applies. Then show that point next to the payout schedule, so the team can see when the employer's cost for each payment changes. For the accrual side, see commission accrual mistakes.
What this review does not cover
These three figures are only part of a rep's pay. The review does not cover federal income tax withholding, state or local taxes, benefit deductions, retirement contributions, or any other deduction on the pay record.
State and local tax rules vary by location, so they need their own checks from people who know those rules. Withholding depends on details that payroll and the rep's own forms establish, so do not try to verify it from these three figures.
Keep the habit
The discipline is what makes the review work. Compare the lines every run, not only when a rep complains.
A quick check before release costs a few minutes. A correction after the pay has gone out costs a conversation with the rep and a fix that someone in payroll has to track.