Count new AE starts as partial quarterly capacity, using ramp factors that reflect their actual start dates and progress toward full productivity.
Key takeaways
- Separate the roster count from effective selling capacity.
- Adjust ramp factors for actual start dates and your team's history.
- Account for departures in the quarters they affect.
- Work backward from planned starts using your measured hiring lag.
A new AE is not a full AE on the day they start. Until they ramp, they carry a fraction of the selling load of a tenured rep, and that fraction changes from one quarter to the next. If you count every hire as a full head from their start date, your plan overstates what the team can sell, and you find out in the middle of the quarter when the numbers do not land.
This post walks through a practical method. It uses three ramp rates, 50%, 75%, and 100%, taken from a worked headcount model in the Sales Headcount Planning Guide from CaptivateIQ. Those rates are the assumptions in that model, not a universal benchmark. Treat them as a starting structure and replace them with your own history. The method stays the same either way: convert headcount into effective capacity one quarter at a time, then work backward to set hiring dates.
Headcount is not capacity
Headcount counts the people on the roster. Capacity counts the selling time those people can produce. For a quarterly plan, you need the second number, and the two diverge as soon as you add new hires.
The CaptivateIQ guide says that a starting roster of 30 AEs puts the organization fairly close, but that the remaining steps determine whether that roster can produce enough capacity across the full planning period. The roster is an input. Capacity is the output you have to model.
Sales performance is a broader concept. According to Xactly, sales performance is a measure of how effectively sales reps, teams, or organizations achieve goals. A new hire who is still learning the product, the territory, and the buyers is not yet contributing at the level of a tenured rep, so a plan that treats them as one overstates the team's ability to hit goals. The fix is not to hire fewer people. The fix is to measure each person's contribution by the period they are in.
Salesforce frames scaling a sales team around a short window, stating "Here's how to scale sales in one quarter or less." That framing is useful. When hiring is fast, the quarter boundaries matter more, because a hire who starts late in one quarter is still early in their ramp for the next. Your capacity model has to show that timing, not just the total.
Start from the roster and subtract departures
Begin with the roster you have at the start of the planning period. Then list every planned departure with its date. The timing of a departure matters as much as the count. The CaptivateIQ guide makes this point with a specific example: the timing of an AE's Q2 departure determines which periods lose capacity.
An AE who leaves early in the year removes capacity from every quarter after that point. An AE who leaves late in the year removes capacity only from the last few quarters. If you list departures as a single annual number, you lose that detail and cannot tell which quarters are exposed.
Account for the selling time lost from each departure date onward. Build your own table the same way, with one row for each AE or cohort and one column for each quarter, and mark the quarter in which each departure takes effect.
Keep incumbents and new hires in separate rows. Incumbents who have been on the team for a full cycle are usually the ones you can count at full productivity. New hires need their own treatment, which is the subject of the next section.
The three ramp rates
The model in the CaptivateIQ guide uses three ramp assumptions: 50%, 75%, and 100%. Applied to a new hire with the example's start timing, they work like this:
- 50% in the quarter the AE starts. The hire is onboarding, learning the product and pipeline, and beginning to work their first deals. They count for half of a productive AE.
- 75% in the second quarter. The hire is past onboarding and carrying more of their own pipeline, but they are not yet at full output.
- 100% from the third quarter onward. The hire is treated as a fully productive AE for the rest of the period.
The guide shows these rates in action. Using the 50%, 75%, and 100% ramp assumptions, an April hire contributes 50% capacity in Q2, 75% in Q3, and 100% in Q4. This schedule reflects the example's start timing. For starts later within a quarter, adjust the factors for time employed rather than applying the same schedule unchanged.
Three rates are a simplification, and that is intentional. A plan with three factors is easy to explain to finance, easy to audit, and easy to update when real data comes in. If your team needs more precision, you can add a step, but start with three so the logic is visible to everyone who reads the plan.
These specific percentages belong to the example model. Your own ramp may be longer, shorter, or shaped differently, particularly if your product is complex, your territories are large, or your sales cycle is long. The structure still holds. Use as many ramp periods as your team's history requires. Both the percentages and the number of periods can change.
Count each hire quarter by quarter
Once you have the ramp factors, the arithmetic is mechanical. For every new hire, write the quarter they start, then apply the factors to the quarters that follow. Sum the results for each quarter to get effective AE capacity.
The CaptivateIQ example includes an April cohort and a July cohort. You can lay that out in a small table for each AE:
| Cohort | Q2 | Q3 | Q4 |
|---|---|---|---|
| April hire | 50% | 75% | 100% |
| July hire | Illustrative: 0% | 50% | 75% |
A July hire is not counted at all in Q2, because they have not started yet. This sounds obvious, but it is an easy error to make. A headcount total can pick up new hires from the day an offer is signed, which is well before the day they start selling.
Build one row for each cohort. Multiply the number of AEs in each cohort by the factor for each quarter. Then add the rows together with the incumbent AEs, who are fully productive in every quarter they are on the team. The result is effective capacity for each quarter, and it will almost always be lower than the roster count in quarters where hires are still ramping.
Use the same convention for every cohort. If you start hires on the first day of a quarter in one case and in the middle of a quarter in another, the factors should reflect that. Otherwise you will get a quarter that looks stronger on paper than it is in practice.
Illustrative example: a cohort's capacity
These are modeled contributions, not measured sales results.
Work the example through Q3
The clearest test of the method is to check a single quarter against the totals. The CaptivateIQ guide does this for Q3. In that quarter, the team has 33 AEs on the roster but 31.5 AE equivalents of effective capacity. The guide explains that the 29 remaining incumbent AEs are fully productive, while the April hires contribute at 75% and the July hires at 50%.
Walk through the sum. The incumbents supply their full output, the April hires supply 75% of theirs, and the July hires supply 50% of theirs. Those contributions add up to 31.5 AE equivalents, not 33. The gap is the ramp drag, and it is the number your plan has to carry.
Quarterly targets built on the roster number will be too high in this quarter.
Use this check every quarter. Add up the incumbents, apply each cohort's factor, and compare the result to the roster. If the effective number is far below the roster number, a large share of the current roster may still be ramping. If the two numbers are close, the model shows relatively little ramp drag, regardless of which quarter you are planning.
Set requisition dates from start dates
Capacity is only useful if the hires show up on time. The CaptivateIQ guide gives a specific rule for this: count back 90 days from each planned start date to find the requisition open date.
This matters because requisitions open well before the start date. Work out that date for every cohort in your table, using the real calendar rather than rounding.
Put the requisition open dates on the same timeline as the capacity table. Doing so makes the dependency visible. A capacity assumption that depends on hires starting in a given quarter is only as good as the requisition work that starts 90 days before that start. If that work slips, the hires slip, and the capacity table needs to move with them.
Be careful with the lag itself. The 90-day figure comes from the guide's example, and your own process may take longer or shorter. Measure from the day each requisition opened to the day the hire started, compare that to the lag in your model, and replace the example figure with your own measured number before recalculating the open dates.
Think of requisition timing as the lever that controls capacity timing. If you need a hire to contribute in a specific quarter, the requisition date is what you can influence, and the ramp factors tell you how much that hire will contribute in each quarter after they start.
Check your ramp assumptions against your data
The 50%, 75%, and 100% factors are a starting point. Before you use them in a plan that matters, test them against what has happened on your team. Pull the start dates for your last several cohorts of AEs, then look at each cohort's output by quarter and compare it to the factors in the model.
Start with a simple question. In the quarter the hire starts, what share of a tenured AE's output did they produce? Ask the same question for the second quarter and the third. If new hires reach full productivity later than the model assumes, adjust the later factors. If they reach it sooner, adjust the other way. Either way, the structure of the table stays the same.
Be careful about which data you use. Bookings are useful, but they can be lumpy, and one large deal can distort a quarter. Pipeline creation, meetings held, or opportunities advanced can give a steadier picture of ramp progress. Choose a measure that reflects selling activity, and apply it consistently to incumbents and new hires so the comparison is fair. When checking bookings, use a consistent quarter cutoff.
Keep a record of the assumptions you chose and why. A capacity plan is a forecast, and reviewers will want to know where the factors came from. Each quarter, update the record with actual results so the assumptions improve over time.
Common mistakes to avoid
Watch for these errors when you review your own model.
Counting hires at full productivity from their start date. This overstates capacity in every quarter where a hire is still ramping.
Using the roster total as capacity. The roster tells you who is employed. It does not tell you how much selling they can do. Keep the two numbers side by side, and make the effective number the one that drives quota.
Ignoring the timing of departures. Treating departures as a single annual number hides which quarters lose capacity. Put each departure in the quarter it takes effect.
Setting requisition dates without a lag. A hire planned to start in a given quarter needs a requisition open well before that quarter. If the requisition date is not calculated from the start date, the hire is likely to arrive late and the capacity plan will be wrong.
Treating example factors as your own. The 50%, 75%, and 100% factors come from a worked model. They are a useful structure, but your team may ramp differently. Test them against your own history before you rely on them.
Mixing conventions across cohorts. Use a consistent calculation method that accounts for each cohort's actual start date. Different start dates can be combined when their factors reflect time employed.
A checklist for your next planning cycle
Work through these steps in order when you rebuild the capacity plan for a new period. Each one depends on the one before it.
- Set the starting roster. List every AE on the team at the start of the planning period, separated into incumbents and any hires already in progress.
- Add planned departures. For each departure, record the quarter it takes effect, and subtract the AE from that quarter forward.
- Group planned hires into cohorts. Group new hires by start quarter so the same ramp factors apply to each group, adjusting for actual start dates.
- Apply the ramp factors. For each cohort, apply the start-quarter factor, the second-quarter factor, and the full-productivity factor. Use your own factors if your data supports different ones.
- Calculate effective capacity. Add incumbents and cohorts together for each quarter, and record the result next to the roster count so the gap is visible.
- Check one quarter by hand. Pick a quarter with several cohorts still ramping, and confirm that the total matches the sum of its parts.
- Work back to requisition dates. For each planned start date, subtract your measured hiring lag to find when the requisition needs to open. The guide's example uses 90 days, but replace that with your own number.
- Review with the people who own the number. Walk finance and sales leadership through the table, and make sure everyone understands that the effective number, not the roster, is what the quota is built on. Keep this capacity check alongside your forecast call agenda.
- Record the assumptions. Note where each ramp factor and hiring lag came from, so the next review can test them against actual results.
Running these steps before the quarter starts gives you time to act. A capacity gap found in the plan can be fixed by moving a requisition, adjusting a departure assumption, or changing a quota. The same gap found in the middle of a quarter is much harder to fix.
Start with a comparison today
If you take one thing from this post, let it be the gap in the example. A roster of 33 AEs had modeled effective capacity of 31.5 AE equivalents in Q3. Today, build your own version of that comparison for the next quarter, using actual start dates and ramp assumptions you can explain.
Questions
Are the example ramp rates universal?
No, the rates are assumptions in the CaptivateIQ model. Replace them with your team's measured ramp factors and adjust the number of periods when needed.
How should a late-quarter start be counted?
Adjust the capacity factor for time employed within the quarter. Apply the same calculation method across cohorts while accounting for their different start dates.
To check a quota against what your reps can carry each quarter, the Quota Forecast Quarter Shape Workbook has a team capacity sheet that counts each rep's start date, ramp time and share of quota hit, and splits the yearly number by quarter and month.