Skip down to the research record

Minnesota commission pay: 2 methods and the postmark date

Quota Forecast Editorial Team · Published · 12 min read

In Minnesota, a commission mailed at the employee's request is deemed paid on its postmark date for the purposes of section 181.14. Most revenue leaders treat a commission payment as one event. The payout run closes, the money goes out, and the rep has it. That picture works for direct deposit. It gets less clear when a rep asks for a paper check to be mailed, because the date that matters for the rep may not be the day you approved the run, the day you printed the checks, or the day the envelope reached a home address.

This post walks through the two ways it describes paying wages and commissions, the statutory date for mailed payments, and how to set up a payout run so those dates are right in your records. It is practical guidance for people who run commission payouts. It is not legal advice, so read the full statute and talk with employment counsel before you change how you pay.

Start with the two payment methods

The rule that matters is in Minnesota Statutes section 181.14. It sets up two ways a commission paid under that section can reach the employee.

The first is the usual manner of payment. The statute says that "Wages and commissions paid under this section shall be paid in the usual manner of payment unless the employee requests that the wages and commissions be sent to the employee through the mails." The default, in other words, is the method your company already uses for pay: direct deposit, an in-person paycheck, or another standard channel in your payroll system.

The second is mail, sent at the employee's request. Mail is an exception to the usual manner, and it applies only when the employee asks for it. That request is the trigger for the second way of counting payment, which is the one with a specific date rule.

These two methods are the foundation for everything else in this post. Before a payout run, you should know which method applies to each rep. Treat that as a fact you record and can prove, not something you assume from a rep's file.

Why the request decides the date rule

The request does two jobs at once. It changes how the payment travels, and it changes which timing rule applies. The statute's date rule reads: if the wages and commissions are sent through the mail "in accordance with a request by the employee," they "shall be deemed to have been paid as of the date of their postmark for the purposes of this section."

Three parts of that sentence are worth reading slowly.

"In accordance with a request by the employee" makes the request a condition. If a rep did not ask for mail, the sentence does not describe that payment. If a rep asked for mail but a payment went out another way, the mailed-payment sentence is not the right frame for it either. Keep the two cases apart.

"Deemed to have been paid" is a deeming rule. It sets the date for the statute's purposes. It does not say that the rep physically had the money on that day, and it does not make the rep paid in any other sense.

"For the purposes of this section" limits the rule to section 181.14. Other parts of your compensation process, such as revenue recognition, accrual reports, tax reporting, or a rep agreement, may define "paid" differently. Do not carry the postmark date into those documents without checking them first.

Mailed payments count on the postmark date

When a rep has requested mail and the payment goes out that way, the postmark date is the date the statute uses. It is not the date the run was approved. It is not the date the checks were printed. It is not the date the rep received the envelope, and it is not the date the rep cashed it.

That changes how you think about your calendar. Most payout runs have several internal dates: the day sales data is locked, the day commissions are calculated, the day someone approves them, the day the file goes to a print vendor, and the day the mail is handed over. Only the postmark, as it appears on the envelope's mailing record, is the date the statute attaches to a mailed payment.

Confirm with whoever handles mailing, whether an in-house team or a vendor, how postmarks are applied in your process. Find out whether the postmark is applied when pieces are accepted, when they are sorted, or at another step. Then build your record around the postmark that results, not around the internal step you assumed would count.

Walk the timeline with the postmark in view

Think of a mailed payment as moving through stages, and decide which stage your records treat as the event that matters. Stage one is the close of sales data, when the numbers that drive commissions stop changing for the period. Stage two is calculation and review, when amounts are checked against plan rules. Stage three is approval, when someone with authority signs off. Stage four is production, when checks are printed or the file is released to a print house. Stage five is mailing, when pieces are handed to the postal system. Stage six is the postmark itself.

Only the last stage is the date the statute attaches to a mailed payment. The earlier stages matter for accuracy and control, but they are not the anchor the statute uses. Teams often see the approval date as the official payout date, and that habit is understandable. For mailed payments under this statute, it is the wrong reference point.

A simple way to keep the stages straight is to label them in your run tracker. Use one column for approval, one for production, one for mail handoff, and one for postmark. Leave the postmark column blank until you have the evidence. A blank cell tells the team that the mailed payment is not yet complete for reporting, even if the checks already exist in a drawer.

The usual manner: the statute gives no date

For the first method, the statute sets the method but gives no date for it.

Do not stretch the mail rule to cover direct deposit or in-person payment. Do not invent a deemed date for those methods either, because the statute gives none.

What you can do is apply a consistent internal rule for usual-manner payments, based on the date your payroll process actually releases them, and write that rule down. Then ask counsel to confirm whether any other part of the statute, or any of your rep agreements, sets a different date. A consistent rule protects you in an audit or a dispute. An improvised rule does not, and neither does a rule copied from a vendor's help page without checking it against the statute.

Build the payout run around both paths

A payout run that handles both methods well has a clear order of steps. Here is one structure that works for most revenue teams. Adjust it to your systems. For a monthly cadence, see commission payout timing.

  1. Lock the rep roster before calculations start. For each rep, record the payment method. Flag every rep who requested mailed payment, and note the date of that request.
  2. Calculate commissions and get approval. Keep the approval record, but do not treat it as the payment date for mailed payments.
  3. Split the run into two batches: usual-manner payments and mailed payments. A rep appears in exactly one batch for each payment.
  4. For the mailed batch, record the mail handoff date and capture the postmark after mailing. Keep the postmark date, not the date the file was sent to the printer.
  5. Reconcile the mailed batch. Every mailed piece should have a postmark date in the record. Any missing date is an open item that holds the report until it is resolved.
  6. Report the paid date. Use the recorded postmark for mailed payments and your consistent internal date for usual-manner payments. Make sure the commission statement shows the same date the payroll report shows.

The sequence matters because it turns the postmark from an estimate into a recorded fact. When someone asks when a payment counted as paid, you can answer from the file rather than from memory.

Record the postmark and keep the proof

A postmark is only useful if you can produce it later. The records that matter most are a mailing log showing which pieces left on which date, the vendor's confirmation or manifest if a vendor handled the mail, and a copy or photo of the envelope or label if your process allows it.

Keep these records in the same place as the commission run file. Do not scatter them across email threads, personal drives, and a vendor portal that may stop showing old records. When a rep questions a date months later, the person answering should be able to open one folder and see the whole chain: approval, batch, mailing, postmark, and report.

Some teams also keep tracking numbers for mailed pieces. Tracking can show where a piece has been, which helps with a question about a lost check, even though it does not replace the postmark. Be clear in your internal notes about what each record proves and what it does not.

When a mailed check is lost, returned, or reissued

Problems happen with mail. A check can be lost, returned to sender, or damaged, and some teams reissue payments in response. These situations raise questions the statute does not answer. For mail that reaches a former employee, see departed rep mail steps.

The statute's date rule is tied to the postmark of the mailing that carried the payment. If a payment is reissued, the record should show the original postmark, the reason for the reissue, the new mailing, and its postmark. Do not overwrite the original date. Keeping both dates visible makes the history clear to anyone who reviews it.

Whether a reissued payment has its own deemed date, or whether the original date controls, is a question for counsel. Put it on the list, and do not settle it by habit. In the meantime, the safe practice is to record every event with its date and to avoid editing history after the fact.

Who owns each step

A payout run crosses several teams, and a missing postmark often falls between them. Name an owner for each step.

Revenue operations owns the roster and the payment method for each rep, including the record of any mail request. That record triggers the whole mailed-payment path, so it deserves the most care.

Payroll or commission operations owns the calculation, the batch split, and the paid-date field in the commission system.

Finance owns the approval and the reconciliation before any report leaves the building.

The mailing team, or the vendor, owns the handoff and the postmark evidence. The vendor contract should require them to provide the mailing log and records on request, with enough detail to match each piece to a rep.

Counsel owns the interpretation of section 181.14 and any question about other rules or agreements.

When nobody can name who owns a step, the postmark usually gets lost. Assign owners in writing before the first run of the quarter, and review the assignments after any change in staff or vendors.

Common mistakes to avoid

Most errors in this area come from a small number of assumptions. Watch for these in your process. For a wider list of payout errors, see commission payout mistakes.

Treating every mailed check as a mailed-at-request payment. The postmark rule depends on the employee's request. If the request is missing or unclear, you have a records problem before you have a timing problem.

Using the payroll system's send date as the postmark. The system's date is an internal step. The postmark is the external record the statute refers to. The two can differ, and the difference can matter near a period close.

Using the arrival date. A rep may receive a mailed check well after the postmark, but the postmark sentence does not point to arrival. Arrival is a separate fact, and you should record it only when a specific business need requires that information.

Reusing the postmark date in every report. The date is limited to section 181.14 purposes. Your accrual schedule or tax reporting may need a different date.

Switching methods mid-cycle without a record. If a rep requested mail and later asked for direct deposit, or the other way around, record the change, the date of the request, and which batch the payment went into.

Relying on a summary instead of the statute. Summaries, blog posts including this one, and vendor help pages can be out of date or incomplete. Read the statute text itself.

Set rep expectations in writing

Reps who ask for mailed payment usually want two things: certainty about when the payment officially counts, and a way to check it. Give them a short written notice that explains how mailed payments are handled in your process. Keep it plain. It should say that mailed payments follow the postmark date under Minnesota law, that direct-deposit payments follow your normal payroll schedule, and who to contact with a question.

Be careful with the wording. Do not promise a delivery date you cannot control. Say what the process is and what the record will show.

When a rep asks why a payment shows a particular date, answer from the record. Show the batch, the postmark, and the report line. A calm, documented answer resolves most disputes before they grow.

Related guides: Close date change log: why the date moved · Close date mismatches: 5 mistakes in forecast records.

Questions to take to counsel

Before you finalize your process, get counsel to answer these questions in writing.

Does section 181.14 apply to each rep type on your roster, and to each kind of compensation you pay, such as draws, bonuses, and accelerators? The statute uses the words wages and commissions, and your plans may mix categories.

How should we document a rep's request for mailed payment, and how long should we keep that record?

What date should our reports use for usual-manner payments, and is that date consistent with the statute?

Do any of our rep agreements set payment dates that differ from the statute? If so, which one controls in a given case?

What should we do if a rep asks to switch to mailed payment after a run has already started?

Write the answers down and attach them to the process document. Counsel's answers are the authority here, not this post.

A quick checklist for the next run

Before the next payout run closes, confirm the following:

  • Each rep's payment method is recorded, and any mail request has its date.
  • The run is split into usual-manner and mailed batches.
  • The postmark date is captured for every mailed piece.
  • The mailed batch is reconciled before any report goes out.
  • Usual-manner payments use one consistent internal date.
  • The mailing log, vendor confirmation, and approval record sit with the run file.
  • The commission statement and the payroll report show the same paid date.

What this comes down to

For Minnesota, the statute gives you two ways to think about commission payment, and only one of them carries a date. A commission paid in the usual manner follows your normal payroll process, and the statute gives no date for it.

Your payout run should make that difference visible. Know which batch each payment is in, record the postmark for each mailed piece, and use the recorded date in every report that depends on it. Do that, and the question "when did this count as paid?" has an answer you can prove.

Read the full section here: Minnesota Statutes section 181.14. This post is general information, not legal advice.

Sources