Skip down to the research record

CRM seat prices to check before adding a seat: 5 steps

Quota Forecast Editorial Team · Published · 10 min read

CRM pricing typically runs from $10 to $150+ a month for each user, depending on features and team size, according to Copper. Copper says its own plans start at $29 a month for each user, or $23 with annual billing, according to Copper. Nutshell says its paid plans start at $37/month for 100 credits, according to Nutshell.

Key takeaways

  • treat the published range as a sanity check rather than a budget line, since the figure depends on features and team size, according to Copper.
  • compare the $29 monthly and $23 annual starting figures for each user with your seat count, since both come from the same page, according to Copper.
  • read Nutshell's $37 for 100 credits as a credit allotment, not a price for each user, according to Nutshell.
  • test your team's workflow during a free trial before you pay, using the 14 days Copper offers according to Copper.

Why seat cost needs a written figure

A seat price on a pricing page is a starting point, not a bill. A revenue leader is usually asked to approve a seat in a meeting where the number has to match a budget line, so the figure should exist in writing before that meeting. Keep it in a short note with the vendor name, the page it came from, the date you checked it, and the billing option that applies.

A written figure also makes two options comparable. Without a price for each user, a seat count, and a billing choice on the same line, one figure can look lower only because it was read on a different basis. Writing down which features and team size the figure assumes keeps the comparison honest.

Budget reviewers tend to ask the same questions about every seat. Having the price for each user, the seat count, and the billing option in one place lets the answer come from the note rather than from memory of a sales call.

The published price range

Copper's CRM resource page gives the broadest figure in this article. A spread this wide is not a budget line, so the range works best as a check on whether a quote sits inside the band the source describes as typical rather than as the number you forecast.

Use the range as a question rather than an answer. If a quote lands near the top of the band, ask which features account for that figure. If it lands near the bottom, ask whether the team size and features in the quote match the ones you plan to use. The source ties the range to those two inputs, so a quote that does not state them cannot be checked against the range.

The table below lists each publisher's quoted figure or statement, with the page it came from. Each cell stays close to the wording the source gives.

PublisherQuoted figure or statementPage
CopperCRM pricing typically runs from $10 to $150+ a month for each user, depending on features and team size.Copper CRM resource page
NutshellAll Nutshell customers get 10 free credits monthly, with paid plans starting at $37/month for 100 credits.Nutshell IQ page
EspoCRMFor more complex business flows, it's recommended to utilize the BPM tool.EspoCRM sales management documentation

The EspoCRM row covers process rather than price, so it does not change the figures you use for a seat decision. It matters only when your sales flow needs more than the seat itself. The Nutshell row is a credit statement, so it belongs with the credit line in your note rather than with the user-by-user figures.

Keep the range in your note with its source name and the qualifier that it depends on features and team size. A reader who sees only the number later may treat it as a price for their own firm, which the range cannot show.

Copper plan price and billing choice

Copper's plans start at $29 a month for each user, or $23 with annual billing, with a 14-day free trial to try it out first, according to Copper. Both figures for each user come from the same sentence, so they belong on the same line of your note. The difference between them is a billing decision you need to make, not an extra cost to add on top.

The source uses the phrase "start at," which marks these as starting prices. Treat $29 and $23 as the lowest published figures, and ask the vendor for the price of the plan your team would actually use before you put a total in a budget. The page attaches the $23 figure to annual billing, so check whether your budget cycle can absorb an annual commitment before you choose it.

Copper's page places the 14-day trial in the same sentence as the starting price. A note that records the trial dates beside the price keeps both facts together when the decision is reviewed.

  • put both $29 and $23 into your sheet beside your seat count, and label which total assumes annual billing.
  • write the date you read the page beside both figures, so the note shows when the starting prices were checked.
  • keep the monthly total visible next to the annual total, so the person who signs off can see both options.

Nutshell credit pricing

Nutshell prices its paid plans in credits. All Nutshell customers get 10 free credits monthly, with paid plans starting at $37/month for 100 credits, according to Nutshell. The quoted figure is a monthly price for a credit allotment, and it is not written as a price for each user. Dividing it by your seat count would treat credits as seats, which they are not.

Because the credit figure is a different kind of number from Copper's, keep it on its own line. Write down the monthly price, the 100 credits in the paid starting plan, and the 10 free monthly credits. Then estimate how many credits your team expects to use. Ask the vendor what each credit pays for before you rely on the figure.

The free credits and the paid starting plan are separate parts of the same line. Note both, so a reader does not mistake the 10 free monthly credits for the 100 credits that come with the paid starting plan. Ask the vendor what your team would do when its usage goes beyond the paid starting plan.

Nutshell's page also makes a statement about its data. It says that while it can't guarantee 100% accuracy, it will make it right if you encounter issues, according to Nutshell. Copy that wording exactly into your note. If your team plans to rely on that data, test it during the trial rather than treating the page statement as a check on your own records.

Trials to use before paying

Both vendors list a 14-day trial, and each page frames it a little differently. Copper says "Try Copper for 14 days free to see if it fits, no credit card needed," according to Copper. Nutshell says "Try Nutshell (including Nutshell IQ) free for 14 days or let us show you around before you dive in," according to Nutshell.

Nutshell's wording offers two routes: a free 14-day trial, or a walkthrough before you start. Copper's wording adds that no credit card is needed. Set the trial end date in your calendar before you begin, so the seat decision is made while the trial is still open.

Copper's partners page also includes a limit that matters for some teams. It says that Copper does not currently offer a native integration with Microsoft 365, according to Copper. If your team works in Microsoft 365, test the workflow you need during the trial rather than assuming it will work.

A simple trial checklist keeps the test useful:

  • run the trial with the people who would use the seat, not only the person who owns the budget.
  • record the figure for each user that a vendor quotes during the trial, with its date, and compare it with the published figure.
  • test any data you plan to use before you rely on it.
  • note any workflow that depends on a connection to another product, and mark it as a gap if the trial does not cover it.

Review any trial figure against the steps in quote checks before the forecast call before it reaches a forecast.

How to work out your own figure

Start with one sheet where each vendor has its own row. Put the price for each user, the billing option, the seat count, and the source date in separate columns, so that no figure is read without its basis.

  • take the price for each user from the vendor page you are reading, and write its date beside it.
  • for monthly and annual billing, multiply the price for each user by your seat count, then compare the two totals side by side.
  • for Nutshell, list the monthly price, the 100 credits in the paid starting plan, and the 10 free monthly credits, and estimate credit use separately instead of dividing by seats.
  • add a separate line for any extra tool your process needs. EspoCRM's documentation says that for more complex business flows, it's recommended to utilize the BPM tool, according to EspoCRM.
  • link the seat cost to the deal side with catalog price before the software deal total, so the purchase and the forecast use the same figure.

The totals are only as useful as the seat count behind them. Count the people who would hold a seat during the trial and after it, and write that count with the date beside it. Once the totals exist, keep the assumptions beside them, including the features you expect to use, the team size behind the estimate, and the trial results that support the choice. Revisit the sheet when the trial ends, and replace any estimate with the figure a vendor actually quotes to you. For timing in a forecast, see forecast period rules.

Illustrative example: seat totals for a 10-person team

Take an illustrative team of 10 seats and an illustrative price of $20 a month for each seat. The monthly total is 10 × $20 = $200. If the same team paid an illustrative $10 for each seat with annual billing, the total would be $100 a month. Put both totals in your sheet with the date you checked the price, and mark which one assumes annual billing.

Next step: Multiply the price for each user by your seat count for monthly and annual billing, then compare the totals.

Related guides: AI call scorecard checks: 5 rules before the forecast · Archive item cap: 300,000 before the weekly board.

FAQ

How much does CRM software typically cost for each user?

The range is wide, so use it only to check whether a quote falls inside a typical band. Ask the vendor for the figure that matches your own features and team size.

What does Copper cost for each user a month?

For Copper, the starting figure is $29 a month for each user, falling to $23 when annual billing is chosen, according to Copper. The page describes these as starting prices, so confirm the figure for the plan your team needs. Record both figures and the 14-day trial on the same line of your note.

What does Nutshell charge for credits?

Nutshell's paid plans start at $37/month for 100 credits, and all Nutshell customers get 10 free credits monthly, according to Nutshell. The price is not written for each user, so keep it on its own line in your note. Ask the vendor how many credits your team would need before you commit.

Is there a free trial?

Yes, both vendors list one, and each runs 14 days, according to Copper and Nutshell. Use the trial to test the workflow your team needs before you add a seat.

Sources