Skip down to the research record

Chargebee quantity change: 3 readings before close

Quota Forecast Editorial Team · Published · 10 min read

For this Chargebee quantity change, carry the $50 adjusted invoice amount, keeping the $60 opening invoice, $10 credit and payment status visible.

Key takeaways

  • Check the opening invoice's quantity, amount and payment status.
  • Match the adjustment credit to the invoice it reduced.
  • Keep the opening amount, credit and final amount separate.
  • Confirm the billing change date before closing the forecast record.

Before a deal closes, a revenue leader may see a seat count in the sales system, a subscription in the billing system, and an invoice somewhere between them. The three readings below follow one case, based on Chargebee's own proration examples, so the same numbers carry from the opening invoice through to the final amount.

Quarter-end reviews tend to focus on the totals, but the totals depend on how each subscription line changed. A quantity change is small in the sales system and can still move a revenue number by a meaningful amount, so it deserves the same care as a price change.

This post is for revenue leaders who have to explain a subscription quantity change in a quarter-end forecast record. The reader's question is usually simple: what number belongs in the record, and why does it differ from the contract or the seat count? The three readings answer that question in order, starting from the invoice and ending with the figure that should be carried.

The starting point is a subscription created with plan quantity 3 on September 1. With a plan amount of $20, the invoice generated is $20 × 3 = $60, and in Chargebee's version of this case that invoice is unpaid. The Chargebee proration documentation walks through this setup, and every number below comes from it.

Reading 1: the opening invoice sets the baseline

The first reading covers the position before anything changes. The $60 invoice is the baseline that every later adjustment is measured against. If the forecast starts from the seat price instead, the record drops the quantity and has nothing to reconcile against when the credit arrives.

Two points matter here. The first is the gap between a plan amount and an invoice amount. The plan amount is $20, but the invoice is $60 because quantity multiplies the plan amount. The second point is status. The Chargebee example describes the invoice as unpaid, so a generated invoice and a collected payment are different states, and the record should show both.

Ask billing for the invoice itself before you enter the number. You want the invoice identifier, its quantity, its amount and its status. Those four fields let someone else check your forecast line without rebuilding it from the CRM.

Write the baseline as one sentence that a reviewer can read aloud. For this case: the subscription was created with quantity 3, the plan amount was $20, the invoice was $60, and the invoice was unpaid. If that sentence cannot be written from the billing record, the baseline is not ready.

Keep the three sources apart. The contract says what was agreed, the CRM says what the seat count is today, and the invoice says what was billed. These can differ for a while, and a forecast that blends them into one number hides which one is wrong. Write each source down on its own line before you combine anything.

The baseline also has to match the contract period. The $60 is the amount for the subscription as it was created on September 1, so the forecast should make clear which period it covers. A baseline with no period attached looks complete until someone compares it with the next invoice, and then the difference is hard to explain. Use the forecast period checks when reviewing that boundary.

The baseline is also the place to catch a list-price mismatch. If the plan amount in the record does not match the amount on the invoice, stop and find out why before you build anything on top of it. A mismatch at this step carries into every later line, and the credit will look wrong even when the billing system is right.

Reading 2: the change lands on the open invoice

The seat count drops in the CRM, and the team assumes the revenue line drops the same day. The billing system may not work that way, so the forecast should follow the invoice rather than the seat count.

In Chargebee's version of this case, the change creates no new invoice. Instead, adjustment credits of $10 × 1 = $10 are created and adjusted against the Payment Due invoice, which reduces the final invoice amount to $50. The proration documentation shows this as a credit against the open invoice, so the change lands on the invoice that already exists.

Do not rebuild the $10 from the seat count. Read the credit from the billing record and check which invoice it was applied against. If you cannot find the credit, the forecast is carrying a reduction that has not been recorded, and the number should not go into a quarter-end record yet.

A credit is easy to forget because it does not look like revenue. It reduces an open amount rather than adding a line, so a forecast built from invoices alone can miss it. Scan the open invoices for credits applied against them before you finalize the quarter's figure.

Watch the wording on the credit. A credit that is adjusted against an open invoice is a different event from a refund paid back to the customer. The Chargebee example describes the first case, so the forecast should not describe the change as a cash return.

Timing needs its own check. Find the date the change took effect in billing, which is not always the date someone edited the seat count in the CRM. If the two dates differ, tie the forecast line to the billing record and write both dates beside it, so a reviewer can see the gap without asking.

Think about the reader of the forecast too. A reviewer who sees a lower seat count and an unchanged revenue line will ask why, and the answer should be on the page. Note the credit, its amount and the invoice it reduced, so the reason is visible without a call. The reviewer then spends the meeting on the decision, not on reconstructing the change.

Reading 3: the final amount belongs in the record

The third reading is the final amount. The invoice starts at $60 and the adjustment credit of $10 brings it to $50 in Chargebee's example. That $50 is the figure to carry for the invoice, not the $60 the subscription started with. The $10 difference is still worth keeping visible, because it explains why the number moved.

Look at the number from the other side too. If the final invoice were still $60 in the record, the forecast would overstate what is owed by the $10 adjustment. That overstatement is small on one invoice, but a quarter-end total is the sum of many lines, and a pattern of small misses can add up to a figure the team would not sign.

Status matters as much as amount. The Chargebee example refers to the credited invoice as the Payment Due invoice, so the forecast should show that $50 as still owed until payment arrives. A line that reads final amount with no status invites the question of whether the money is in hand, and at quarter end that question has to be answered with a date, not a guess.

The second part of the record is the link to the deal. If the contract says three seats and the billing system shows fewer, the sales figure and the revenue figure no longer match. Put the reason next to the change: the quantity, the date it changed, and the invoice that carries the credit. That way a reviewer can trace the forecast line back to the contract without asking the account team.

Show the gross and the net separately. The $60 and the $10 credit belong on their own lines, with the $50 as the total. Netting them into one cell hides the adjustment, and the next person to review the line will have to rebuild it from the invoice.

What the record should show

Put the three readings into one record so the numbers can be checked together. Each line gives a figure, its status and the document that supports it.

LineFigureStatusDocument to check
ExampleOpening amount less adjustment creditPayment still dueInvoice and credit record

Illustrative example: check the subtraction

An illustrative opening invoice of $60 less an adjustment credit of $10 leaves $50. Match the credit to the opening invoice, then compare the subtraction with the adjusted invoice amount. Keep payment status beside the result so the reviewer can distinguish an amount owed from money collected.

The value of the layout is that the reviewer does not have to rebuild the subtraction from memory, and each line points to the document where it can be checked. If a line has no document, it does not belong in a quarter-end figure yet. For a broader review, use the invoice extract reconciliation checks.

Who signs off on the number

Most quarter-end figures pass through more than one owner. Sales knows the deal, billing knows the invoice, and finance decides what the record carries. Each owner sees part of the change, and none of them sees the whole chain unless someone writes it down. Name the owner for each of the three readings in the record, so the question of who confirmed the $50 has an answer before anyone asks it.

Keep the sign-off short. A single line for each reading, with a name, a date and a status, is enough for most reviews. Longer notes tend to repeat the invoice, and a reviewer who has to read three paragraphs to find the $50 will start to doubt the rest of the page.

Agree on the words before the review starts. If the sales lead says the deal is at three seats and billing says the invoice is at $60 with a credit pending, both statements can be true. The forecast line should say which one it uses and why. Writing that choice down prevents the same disagreement from coming back at the next close.

Today, open one changed subscription's invoice and credit record, reconcile the amounts, and bring any mismatch to billing before updating the forecast.

Questions to put to billing before close

Which invoice carries the opening amount?

The original subscription invoice carries the opening amount. Ask billing to confirm its identifier and current payment status.

When did the quantity change take effect?

Use the effective date recorded in billing. Compare it with the CRM edit date and retain both if they differ.

Which credit reduced the invoice?

Use the adjustment credit linked to that invoice. Confirm its amount and application rather than calculating a reduction from the seat count alone.

How should the final amount reconcile?

The opening invoice amount less the applied adjustment credit should equal the final invoice amount. Investigate a mismatch before carrying the figure into the forecast.

What if part of the change is pending?

Record the pending status and ask billing when it will post. Keep an expected change distinct from a credit already applied.

Write the answers next to the question, not in a separate thread. A forecast line with its answer beside it can be checked in minutes. A line with the answer in an email chain has to be rebuilt each time someone asks.

Scope of this example

The case above comes from one Chargebee example, so it is not a description of every account. The proration page gives worked numbers for specific cases, and your subscriptions may use different settings, plans or billing dates.

Check your own configuration before you copy any of this. Ask billing which setup applies to your subscriptions, and test one real contract against the page before you rely on the pattern for the whole quarter.

This post does not cover how your CRM sends seat counts to billing, how your ERP books revenue, or how your auditors read a credit. Those steps depend on your systems and your policies, so the three readings are a checklist for the conversation, not a substitute for that work.

Before the deal closes

A quarter-end forecast gains credibility when every line can be traced. A quantity change touches the contract, the seat count, the invoice and the credit, and each of those can be checked in a short time if the readings are kept in order. The effort is small compared with the cost of a number that cannot be explained.

Finally, put the three readings into the review before the deal closes, not after. A revenue leader who can point to the baseline invoice, the credit and the final amount can answer a quarter-end question in one pass. Without them, the discussion turns into a debate about which system is right, and the forecast stays open longer than it should.

Sources