Skip down to the research record

AE capacity planning: 4 checks before a review

Quota Forecast Editorial Team · Published · 11 min read

To check AE capacity, divide the annual AE revenue target by the expected annual production of one fully productive AE.

Key takeaways

  • Check the active AE roster and its date before comparing it with capacity needs.
  • Keep annual quota and expected attainment visible beside expected production.
  • Divide the annual AE revenue target by expected annual production for each fully productive AE.
  • Record expected departures by date, and replace every example figure with your own inputs before the review.

In the example, $26.5 million divided by $850,000 gives roughly 31.2 fully productive AEs needed across the year, according to Captivateiq. Keep the roster date beside the count so both figures refer to the same point in the year.

Why a coverage talk needs capacity figures

A coverage review asks whether the AE team can carry the annual number, so capacity figures give that question numbers to test. Results are measured in new revenue, quota attainment, win rate, average deal size, and sales cycle length, as well as activities like calls, meetings, and pipeline growth, according to Xactlycorp. Place the capacity figures beside the measures you plan to discuss, so the review reads from one document. For the filters that narrow a pipeline to coverage-review scope, see Pipeline report filters: 4 tools for coverage reviews.

Sales productivity may measure how effectively your sales team turns its time and resources into revenue, according to Xactlycorp. In your sheet, the roster and the expected production for each AE can sit next to the annual target. Keeping all three on one page lets the discussion move from headcount to revenue without switching files.

Use these four checks to organize the review.

capacity inputreview check
Starting rosterMatch the count to the dated active AE list.
Quota and expected attainmentSeparate the annual quota from the attainment assumption.
Annual AE revenue targetMatch its period to expected annual production.
Expected departureShow the exit date and the roster before and after it.

You can write an owner beside each figure, such as the person who maintains the roster and the person who sets the annual target. A short note can record where each figure came from, such as a dated export from a sales system or a planning sheet. Owners show which number needs confirming before the meeting starts, and the note shows its source.

The starting roster and the team mix

Starting AE roster of 30

At the start of the year, the example has 30 AEs and 15 SDRs supported by five managers, according to Captivateiq. Those 30 AEs form the starting roster for the AE capacity figure, so the count should match the active AE list in your own records. Write the date of that list beside the number, because the same count can mean different things at different points in the year.

This article keeps SDRs outside the AE capacity math. Put SDRs on their own line of your roster sheet with a note that they are tracked separately, so no reader counts them as AEs. A separate line lets the coverage review see support headcount without changing the AE figure that is compared with the target.

List each manager beside the team that person leads, so the discussion can see who owns each AE. A manager column connects every AE to a named person for follow-up on the roster. Confirm the roster with those managers before the review, because they can check each name against their teams.

The 50-person example is built on simplified assumptions, according to Captivateiq, so its team mix works as an illustration rather than a benchmark. Read your own mix from your roster instead of copying the example's counts. Record the mix as counts by role and by manager, with dates, and check it against your hiring plan and open seats.

You can keep the AE roster as a dated list with separate lines for AE count, ramping AEs, and open seats. Check the AE count against your active roster before the meeting starts. Record any gap with the date it appears rather than netting it into one figure, and keep ramping and open seat lines apart from the active count. For a related planning check, see new AE ramp rates.

Quota and expected attainment for each AE

Annual quota of $1 million for each AE

Each AE carries a $1 million annual quota, and the company uses 85% expected attainment for planning, according to Captivateiq. The quota is the annual figure set on each AE, and the attainment is the planning assumption the example applies. The expected production for each AE in the next section is built from these two inputs, so keep both visible on your own sheet.

Do not carry it into your firm's plan as a rate until your recorded attainment supports it. Attainment history sits in your own sales system or reports, so check that record first. Label the figure as an assumption wherever it appears, so it is not read as a result.

You can record the quota for each AE on a separate line, even though the example uses one quota for every AE. A separate line shows any quota that differs from the $1 million figure. Date each line when it is set, so later changes can be traced back to their source. A dated line also makes the quota history easier to audit later in the year.

Keep the quota and attainment on one annual basis, as the example does with its annual quota. A sheet that mixes annual and quarterly figures makes the comparison for each AE harder to read. Note each change to either input with its date and its reason, so the expected production figure can be traced.

Confirm which attainment figure the sheet uses before the review starts, since mixed definitions make the comparison with $850,000 less direct. Flag any AE whose attainment is recorded differently in a separate note. Once the definition is fixed, each AE's line can be compared with the example's $850,000 without changing the basis.

Target and the fully productive AE count

Annual AE revenue target of $26.5 million

For the hypothetical 50-person team, the annual revenue target attributable to the AE organization is $26.5 million, according to Captivateiq. Test the AE team against that same scope. Your own annual target should cover the same period as your expected production for each AE, and writing that period beside the target keeps both figures aligned.

At 85% expected attainment, one fully productive AE represents $850,000 of expected annual production, according to Captivateiq. That production figure is the divisor in the example, so the target is read against it. Use your own production figure from your records, and keep the example's number as a reference point only. Name the source of each figure beside it so the group can trace the division.

The resulting figure is a planning need, not a count of AEs on staff. Keep it separate from the headcount on your roster, and read your own result the same way. Compare that planning need with the roster count at the review.

The example reports its own result as roughly 31.2, which shows the result is not a whole count. Carry your result to one decimal place so the review sees the same precision as the example. A result carried this way can be compared directly with the roster count.

Illustrative example: 20 AEs needed

This made-up team needs an annual target of $20 million, and each fully productive AE is assumed to produce $1 million of expected annual production. Dividing the two gives 20 fully productive AEs. If the roster holds 15 active AEs, the gap is 5. These numbers show the method only, not a benchmark.

Both figures should sit on the same annual basis before dividing, since the example uses an annual target and annual production. A mismatch in basis would change the answer the division gives. Check the basis of each input line before the review starts, so the result is tested against consistent figures. Consistent inputs also make the result easier to defend with the people who own each figure.

The Q2 exit and the Q3 roster

One AE leaving at the end of Q2

For this example, one existing AE is expected to leave at the end of Q2, according to Captivateiq. The departure is a dated change, so it is the first line to check on your own roster. Show the departure with its exit date beside the AE's line, so the review can see the count before and after that exit. Treat the departure as an expectation until the manager confirms it. For the cutoff checks that apply to a quarter-end date, see Quarter cutoff dates: 6 checks before freezing your record.

So the plan has 30 incumbent AEs contributing through Q2 and 29 beginning in Q3, according to Captivateiq. The Q3 figure follows from the expected departure named in the example. Show both counts in adjacent columns on your sheet, using the same dates, so the change is easy to see during the review. Both counts come from the same plan, so compare them on the same roster basis.

Your roster needs the same kind of line for each expected departure, with its exit date noted beside it. A single total for departures hides which quarter each AE stops counting. Dated lines show the quarter from which each departing AE stops counting toward the plan, and they let the group test whether a date still holds. Each line can carry a short note about who confirmed the date and when.

Place the assumption label beside the exit date so no reader mistakes it for a confirmed fact. A reviewer can then see which departures are firm and which still need checking. Keep quarters with no departures on the sheet, so each quarter's count stays visible.

Confirm these entries with the manager who owns each seat before the review. Mark the quarter from which each departing AE stops counting, so every quarter's line reads directly.

Limits of the example and how to compare your own

Start with the roster figure, since later figures depend on the team that exists at the start. Keep the comparison in your own records with each figure noted beside its date. Dated notes let the review explain differences without rebuilding the sheet.

Check your quota and attainment against the $1 million quota and the 85% planning assumption. Mark which figures come from records and which come from assumptions, so the discussion keeps them apart. Each marked assumption should name the person who set it, so it can be revisited at the review.

Check your annual target against the $26.5 million in the example, and your expected production for each AE against $850,000. Keep any difference visible, since the example is one set of figures. Visible differences give the review a specific point to test, rather than a general sense that the plan is tight. Note the period of each target as well, so the comparison matches the period used in the division.

The example shows the steps, and your records supply the numbers.

Your next step is to enter your roster, quota, expected attainment, and annual target into your own sheet. Then divide the annual target by your expected production for each AE, and compare the result with your roster. Record dated departures and assumptions beside that count so the review can see which figures are firm. Bring the sheet to the review so the count is tested against the roster.

AE capacity figures for a coverage review

How many fully productive AEs does $26.5 million need in the example?

The calculation gives roughly 31.2 fully productive AEs across the year, according to Captivateiq. That figure belongs to the example rather than to your team. Build your own figure by dividing your annual target by your expected production for each AE.

What does one fully productive AE represent in the example?

One fully productive AE represents $850,000 of expected annual production at 85% expected attainment, according to Captivateiq. Use your own recorded attainment before you use a production figure for each AE in your review.

How many AEs remain from Q3 in the example?

The example has 29 incumbent AEs beginning in Q3, according to Captivateiq. The drop follows the expected departure at the end of Q2. Record your own expected departures with their exit dates.

What expected attainment does the example use for planning?

The example uses 85% expected attainment for planning, according to Captivateiq. That figure is a planning assumption in one publisher's example rather than a rate for your firm. Replace it with your team's recorded attainment before the review.

How many AEs are on the roster at the start of the year in the example?

The starting roster has 30 AEs, according to Captivateiq. Keep SDRs on a separate line of your roster sheet.

Can the example's figures serve as a benchmark?

No, the example's simplified assumptions make it an illustration rather than a benchmark, according to Captivateiq. Compare each figure with the matching line in your own records.

To check a quota against what your reps can carry each quarter, the Quota Forecast Quarter Shape Workbook has a team capacity sheet that counts each rep's start date, ramp time and share of quota hit, and splits the yearly number by quarter and month.

Sources